To ensure the longevity and effectiveness of your vehicle magnets, please follow these important guidelines:

Installation

• Clean Surface: Thoroughly clean and dry both the magnet and the vehicle surface before application. Use mild detergent and water—avoid wax or polish immediately before application.

• Smooth Application: Apply the magnet to a flat, metallic surface (not aluminum or fiberglass) by starting at one edge and gently letting it lay flat to avoid air pockets.

• Avoid Curves & Moldings: Do not place magnets over curves, body creases, or moldings, as this can cause lift and loss of adhesion while driving.

Daily Use

• Secure Fit: Ensure all edges are flush and the magnet lies flat against the surface before driving.

• Remove Before Car Wash: Always remove magnets before automatic or pressure car washes. High-pressure water can dislodge or damage them.

• Temperature Considerations: In extreme heat, magnets can become pliable or bond too tightly. Gently lift from the corners to remove and avoid damage.

Maintenance

• Daily Removal Recommended: Remove magnets daily or at least weekly to clean both the back of the magnet and the vehicle surface. This prevents dirt buildup and possible paint damage.

• Store Properly: When not in use, store magnets flat in a clean, dry place. Never stack magnets with the magnetic sides facing each other.

Important Notes

• Not for Highway Use on Unsecured Surfaces: If magnets are not fully flush or if used at high speeds, they may detach.

• Check Local Regulations: Some areas have rules about signage on vehicles—please verify compliance if used for commercial purposes.